Un ensemble de thermocouple qui peut être facilement monté à de multiples surfaces. Parfaitement adaptable à plusieurs appareils de mesure de température en surface sur lesquels le montage fixe est possible.
EXEMPLES DE MODELES COURANTS CI-DESSOUS. VEUILLEZ UTILISER LE TABLEAU CONSTRUCTEUR DE REFERENCE POUR TROUVER LES MODELES SPECIFIQUES QUI SONT DISPONIBLES.
Pour les spécifications complètes des produits, veuillez consulter la section "Liens associés" en bas de page.
Dimensions de la rondelle M3,5 et M4 : L 22 x L 6,5 mm M4,5 et M6: L 25 x L 9 mm
Rated 5 out of
Solid thermocoupleSo far so good with this thermocouple. One recommendation I do have, double/triple check the connector before ordering. I thought I ordered the right one, but ended up having to order a replacement. Top to Omega, add images of the termination chosen to the spec wizard.
Date published: 2021-01-04
Rated 5 out of
Mr Merkin from
Technical staff helped me get all the right parts!Just what I was looking for! Great support from your technical staff!
What is the outer diameter of the wire with PFA insulation?
Asked by: JDCT
The overall nominal outer diameter of the PFA lead wire for the WT series is 0.068 x 0.116".
Answered by: Applications Engineer AB
Date published: 2020-05-10
Does a thermocouple that is designed to be bolted to a surface measure the environment very well? I want to measure the temperature of the air using a similar thermocouple
Asked by: CJames
Thank you for your inquiry C James. You can use a Bolt-On Thermocouple to take air temperature measurements.
Answered by: Application Engineer MC
Date published: 2021-03-02
What is meaning of Minimum Temperature Measurement - 60 in
Asked by: Bobble
The heading is incorrect for the column and should read "Lead wire length" and it will be corrected.
Answered by: ANBENG
Date published: 2020-02-17
What is the thickness of the washer itself?
Asked by: Brad J
Hi Brad J, the thickness of the washer is 1/16th of an inch.
Answered by: AndrewA
Date published: 2020-08-14
1. Where is the thermocouple measurement made? Can you cut off the bolt hole without affecting the performance?
2. Are these made in an un-bent configuration?
Asked by: bchynoweth
Thank you for the inquiry. The thermocouple tip ( sensing portion of the TC) is pressed within the washer. You will notice the small channel on the shoulder of the washer. You could cut off the bolt hole being careful not to cut in to the channel.
We do not offer a flat version.
Answered by: NorwalkAE_RS
Date published: 2020-04-23
What are the wire colors WTJ-6-36-TT
Asked by: theegg
Thank you for your inquiry! The WTJ-6-36-TT is a type J thermocouple so the wires will be red and white.
Answered by: Application Engineer JM
Date published: 2021-02-17
Are any of these t/c made with stranded wire? I need something that is flexible. If so, what is the Dynamic Bend Radius?
Asked by: Greg B
These are all made with solid wire. Please use 3 x wire diameter for minimum bend radius. Thinner wire will hold up longer. You might consider the SA1-K or the SA1XL-K as alternate.