K Type Thermocouple Duplex Wire
PFA Insulated Thermocouple Wire
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$365.00 |
| 5-9 | C$346.75 |
| 10-24 | C$328.50 |
| 25-49 | C$310.25 |
| 50-99 | C$292.00 |
| 100+ | C$273.75 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Fil de thermocouple type "K" haute qualité
- Idéal pour la fabrication des thermocouples
- Disponible pour expédition immédiate
- Choix d'isolation, diamètre du fil et longueurs standard
- Disponible en tolérance IEC classe 1 ou classe 2
- Conducteurs massifs ou toronnés
GG-K-24-SLE-500 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Temperature Min
Temperature Max
Temperature range
Thermocouple Calibration Type
Wire Gauge
Conductor Insulation
Conductor type
Cable Length
Additional Feature
Cable Type
Overall Insulation
Number of Pairs
Overbraiding Type
Special Limit of error
Color Code Standard
Category
Temperature Unit
Description
Code couleur IEC :Fil positif, vert ; fil négatif, blanc; ensemble, vert
OMEGA Engineering n'utilise pas le PFA ou PVC retraité dans la fabrication des fils thermocouples.
Veuillez utiliser le tableau ci-dessous comme guide pour les types disponibles. Le tableau "Pour commander" contient quelques examples de modèles courants. Veuillez utiliser le "Tableau constructeur de référence" (ci-dessous) pour obtenir les prix des autres modèles disponibles. Utilisez le tableau ci-dessous comme guide pour les différents types.
Rated 5 out of
5
by
JimboIndy from
Holds up to elevated temperatures
Purchased this wire about three weeks ago for an upcoming U.L. test. Insulation held up very well to temperatures of 600 to 800°F. I thought the test conditions, heat/grease/mechanical abuse, would destroy the thermocouples and that they would need to be replaced for each test run. I was wrong. They survived several test runs and are still usable.
Date published: 2017-08-04
Rated 5 out of
5
by
CandiO from
Easy & effiecient!
I buy a superior quality wire from OMEGA and I am impressed with the ease of ordering.
Date published: 2016-03-01
Rated 3 out of
5
by
roundup from
Sturdy Extension Wire
The wire was very solid which worked well for durability purposes. This feature made it difficult to properly connect the wire to miniature k-type connectors.
Date published: 2016-10-17
Rated 3 out of
5
by
Too much from
A bit overpriced....
A bit overpriced for the quality of the wire. It was not an easy product to work with.
Date published: 2017-06-06
Rated 5 out of
5
by
Ricky from
Excellent product
Buy this from Omega all the time, never a problem.
Date published: 2018-01-02
Rated 5 out of
5
by
Press10 from
Best quality out there
Product arrived exactly as described and excellent quality!
Date published: 2022-03-11
Rated 5 out of
5
by
Matt41270 from
Omega thermocouple wire
Omega thermocouple wire is our go to wire for all our temperature measurement needs.
Date published: 2022-03-08
Rated 5 out of
5
by
NDPIII from
Great service / Great Product
Shipped quickly and correctly, arrived in perfect condition. This product holds up great in our dyno applications .
Date published: 2022-02-10
Hi, Is the wire compatible with organic/week acidic solution of chemical reaction to measure the temperature of the solution?
Hi Pawan,
The thermocouple alloys may contaminate your process. For this I would recommend HSTC series; hermetically sealed in PFA thermocouples.
https://www.omega.com/en-us/temperature-measurement/temperature-wire-sensors/hstc/p/HSTC-TT-20S-65
Best regards,
OMEGA
Date published: 2021-06-01
Hi, what would be the most sutable type of thermocouple wire to be used for measuring a temperature around -5c to +5c ? I was planning to use the HH-25U or HH12C readout. Is Type T is more accurate than K or J for example?.
Thank you for your inquiry. At low temperatures, Type T is the most accurate of all thermocouple types.
Date published: 2020-05-10
Hi I am looking at purchasing a spool of TT-K-24-500 and I need it calibrated How do I go about doing this?
Hello,
If you need the wire with a calibration certificate you can order as part number TT-K-24-500-CAL-3.
Date published: 2020-06-06
What's the minimum bend radius?
Thank you for the inquiry. Please allow for 5 to 7 diameters of the wire (narrow side dimension).
Best regards
OMEGA
Date published: 2020-08-12
Hi, Is compatible with OM-CP-OCTTEMP-A? Regards
Hi, thank you for your question. OM-CP-OCTTEMP-A if definitely compatible with type K thermocouples. If you are making your own thermocouples with this wire, please remember to use miniature connectors (like SMPW-K-M) to plug directly into your logger.
Date published: 2020-06-17
How many times it can be used at average temp around 750 °C with insulation of nextel cermaic ? Is it (nextel cermaic) flexible enough to bend & what are effects of high temp around 1000 °C on it?
Thank you for the inquiry. This product has Nextel ceramic fiber which is not suitable for bending applications. The ceramic fibers used in the material become brittle after exposure to high temps. If you must use this material for bending app please consider the following with Inconel overbraid which keeps the fibers in place.
https://www.omega.com/en-us/temperature-measurement/temperature-wire-and-cable/thermocouple-wires/p/XC-XS-XT-XL-WIRE
Best regards
OMEGA
Date published: 2021-04-30
HH-K-20-1000: What is the voltage rating
Thank you for your inquiry. This item does not have a voltage rating because it is tray rated.
Date published: 2021-01-28
Can this wire be reused? If so, how many times? Going up to 1225°F.
Thank you for your request. This wire's insulation is rated for physical exposure up to 392°F.
Date published: 2019-10-18