PST rejoint DwyerOmega. En savoir plus>
Thermocouples Isolés Prêts à l'Emploi Avec Fils Dénudés
Ready-Made Insulated Thermocouples
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$111.64 |
| 10-24 | C$106.06 |
| 25-99 | C$100.48 |
| 100-499 | C$94.89 |
| 500-999 | C$89.31 |
| 1000+ | C$83.73 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Fournis en paquets de 5
- Disponibles - expédition immédiate
- Isolation PFA, soie de verre ou Kapton
- Fils à diamètres de 0,8, 0,5, 0,25, 0,13 et 0,08 mm
- Fait de fil classe 1
- Longueurs standard de 1 m et 2 m
- Certificat de calibration traçable
5TC-GG-J-30-72-ROHS Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
* Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente ou cliquez sur le bouton CONFIGURER pour créer la vôtre.
Thermocouple Type
Process Temperature Max
Process Temperature Range
Cable Insulation
Cable Length
Color Code Standard
Wire Gauge
Additional Feature 2
Category
Process Temperature Unit
Process Temperature Min
Junction Type
Nominal Resistance
Accuracy
Number of Wires
Termination Connection Type
Pack Size
Description
Thermocouples à fils perlés disponibles avec isolation PFA, soie de verre ou Kapton, dans de multiples longueurs et jauges. Les conceptions les plus courantes sont indiquées dans le tableau "Pour commander" ci-dessous. Pour obtenir d'autres configurations, veuillez utiliser le Tableau Constructeur de référence ou contacter le service de ventes.
Rated 4 out of
5
by
Patrick from
Good quality, good service
Repeatedly buy thermal couples, happy will recommend to others
Date published: 2015-12-07
Rated 5 out of
5
by
Jhuffman from
Great for small applications
40awg works great for my small devices —- allowing me to get right to the spot I want to measure.
Date published: 2018-11-11
Rated 4 out of
5
by
Napabaker from
Nice Product
I purchased a package of 5 thermocouples. They arrived well packaged and, for someone who doesn't work w/thermocouples, the workmanship and insulation were very nice. I would definitely purchase this product from Omega again.
Date published: 2018-03-15
Rated 5 out of
5
by
Sharon from
Best Source
Easy to get; great price, discount offers , fast delivery
Date published: 2017-11-05
Rated 5 out of
5
by
alex208 from
Purchasing/Buyer
I'm happy with my purchase and the delivery time was great
Date published: 2017-08-21
Rated 5 out of
5
by
Harloid from
Excellent TC's
Excellent thermocouples, durable and directly integrate-able into all of our multiplexer systems. The connectors (separate purchase) make quick work of the bare wire for our handheld probes. Easy.
Date published: 2016-09-30
Rated 5 out of
5
by
CMAU from
Easy web page to navigate
Arrived within 3 days, as promised. Order complete and as ordered. I buy again from Omega
Date published: 2017-11-16
Rated 4 out of
5
by
Rubin from
Reliable TCs
Only docked a star as I wanted T-type but the stock was too low, which it often is. I bought K-type as they were sufficient, and they arrived as expected.
Date published: 2024-08-30
What is the temperature range for 5TC-TT-T-20-72? Can it measure at -80℃? what is the maximum temperature? Then is this made up from special limit of error wire?
Thank you for your inquiry Lee1. The process temperature range of 5TC-TT-T-20-72 is 0 to 260 C (32 to 500 F) and this thermocouple is made from special limit of error (SLE) wire. It could measure -80 C but the accuracy for all the SLE thermocouples is not guaranteed for measurements below 0 C since it is non linear below 0 C.
Date published: 2022-08-01
What is the diameter of the thermocouple 5TC-TT-J-40-36? Can it be used at temperatures up to 500 °C? At what temperature does the insulation start to melt for this thermocouple?
Thank you for your inquiry Moe1. The size of the cross section of 5TC-TT-J-40-36 is 0.4 x 0.7 mm (0.017" x 0.026"). You cannot use 5TC-TT-J-40-36 at temperatures up to 500 °C since it is only rated for temperatures up to 260 C and will start to melt if used in temperatures over 260 C.
Date published: 2022-01-31
What is the percentage uncertainty for 5TC-TT-KI-40-1M? I am working in a temperature range of 15-60 degrees, is the uncertainty 0.4%, so 0.06-0.24 C?
Thank you for the inquiry. We do not provide uncertainty numbers for this series. Accuracy spec follows ANSI special limits of error; +/- 0.4% of reading or 1.1 C whichever is greater.
Best regards
OMEGA
Date published: 2020-11-21
Can I submerged 5TC series thermocouple in water ?
Thank you for your inquiry. We do not recommend submerging 5TC series thermocouple in water. For a submersible thermocouple, please look at the HSTC series hermetically sealed thermocouples: https://assets.omega.com/pdf/test-and-measurement-equipment/temperature/sensors/thermocouple-probes/HSTC.pdf
Date published: 2024-09-28
What's the maximum Temp for 5TC-TT-T-24-72 that the insulation not melt?
The maximum temperature that the wire insulation can withstand is 260C
Date published: 2020-10-19
What is the external dimension (cross section) of 5TC-TT-T-40-36?
(0.017 x 0.026) (Height x Width)
Date published: 2021-11-12
What is the Tip Length? 5TC-TT-T-30-120. (The total length is 3m I need to know the Tip Length at the point of contact. Is it immersible in the water?
The bead is nominally 2.5x the diameter of the wire so 30 AWG being .010" the bead is 0.025". It is not considered an immersion probe but for short durations it can be used.
Date published: 2023-06-08
Can this exposed thermocouple be attached directly to a metal surface? Or does it need to be electrically isolated first.
Thank you for your inquiry. Yes, you can attach the exposed thermocouple directly to a metal surface but we recommend electrically isolating the tip to avoid any noise issues.
Date published: 2024-10-01