PST rejoint DwyerOmega. En savoir plus>
Transmetteur de Température 2 voies Montage Sur Rail DIN
Dual DIN Rail Temperature Transmitter
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$247.58 |
5-9 | C$235.20 |
10-24 | C$230.25 |
25-49 | C$220.35 |
50-99 | C$215.39 |
100+ | C$210.44 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Posséde des émetteurs à deux chaines ou des isolateurs de signal (4 à 20 ou 0 à 20 mA)
- Montage DIN Rail
- Isolation entrée à sortie (les entrées ne sont pas isolées - utilisez uniquement des capteurs thermocouple)
- Alimentation universelle
- Pour thermocouples et RTD: Unité affiche degré C uniquement
TXDIN70-24V Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Supply Voltage Type
Input Type
Input Class
Input Ranges
Output Type
Output Class
Isolation
Programability
Description
Le TXDIN70 possède deux chaines d'entrées configurables, et peut supporter une des entrées de tension multiple, RTD, ou thermocouple avec compensation de jonction auto référence. Lorsqu'il est connecté en parallèle à une résistance précise externe, il accepte une entrée de signal de courant. Chaque chaine possède son propre filtrage numérique et peut ajuster son degré de filtrage.- Le modèle génère deux sorties courant isolées, de 4 à 20 ou 0 à 20 mA. La plage de retransmission peut être facilement définie.
- Le modèle est montable en DIN rail. Sa largeur est de 22,5 mm seulement. L'instrument peut être configuré facilement en le connectant à notre afficheur à main E8.
- Alimentation universelle de 100 à 240 Vca ou 24 Vcc.
Type d'entrée
Thermocouple: K, S, R, E, J, T, B, N, WRe5-WRe26
RTD: Pt100, Cu50
Tension linéaire: 0 à 20 mV, 0 à 60 mV, 0 à 100 mV, 0 à 1V, 0,2 à 1V, -20 à 20 mV, -100 à 100 mV etc.
Plage d'entrée de l'instrument K(-50 à 1300°C), S(-50 à 1700°C), R(-50 à 1700°C), T(-200 à 350°C), E(0 à 1000°C), J(0 à 1200°C), B(0 à 1800°C), N(-50 à 1300°C), WRe5%WRe26(0 à 2300°C), Pt100(-200 à 900°C)
Entrée linéaire: -9990 à 30,000 unités définies par l'utilisateur
Précision de retransmission: 0,3% de la déviation maximale ±1 digit (y compris erreur d'entrée et sortie)
Caractéristique de sortie: peut être facilement définie dans une gamme de 0 à 22 mA avec tension de sortie maximum ?11V
Drift de température: ?0,015%de la déviation maximale/°C (y compris drift de température d'entrée et de sortie)
Compatibilité électromagnétique(CEM): ±4 KV/5 KHz selon IEC61000-4-4 (EFT); 4 KV selon IEC61000-4-5
Tension résistante à l'isolation: tension entre alimentation, entrée de signal et bornes de sortie ?2300 Vcc; entre entrées ou 2 sorties ?200 Vcc
Alimentation: 100 à 240 Vca, -15%, +10% /50 to 60 Hz; ou 24 Vcc/Vca
Alimentation: ?3W
Ambiance de fonctionnement: Température -10 à 60°C; humidité ?90%HR
Note: thermocouple B obtient la précision de mesure ci-dessus uniquement avec une plage de 400 à 1800°C. La mesure 60 à 400°C est moins précise.
Rated 5 out of
5
by
Accidental Gardener from
Great value & space saver for cost
I have a hobby greenhouse for peppers, tomatoes, peas, beans, carrots & cucumbers over the past 5 years. As a retired Instrument Technician (who enjoys the trade) I've mostly automated the greenhouse with used surplus instrumentation. After having some drifting issues with previous temperature xmtrs, I tried my luck with a pair of these TXDIN70-24 xmtrs & a Display unit 3 years ago. I was very pleased with the ease of setup, dual inputs & DC power version (I didn't want any AC influence on my T/Cs). I measure outside & various inside temps which are processed by these xmtrs before being passed on to other controls. A couple of years back I made a pair of removable mini greenhouses that I call 'Table-Frames'. They are tied together with 3" PVC dryer hose. Each has a removable wood framed glass roof & a 150W heater (earlier purchased from Omega that is pulse duration controlled via a PLC. A small fan in the left T-F recirculates the air. I use these to keep some seedlings just above freezing as the GH does go below freezing over the winter. These are removed late Spring to make room for other plant pots. I've since purchased another 2 TXDIN70-24s for each T-F as well as the deep Carrot bin soil temps.
Date published: 2020-04-29
Rated 4 out of
5
by
joshtibb from
Needs to Be Packaged w/ Programmer
Works well now, after a second purchase and additional $19 in shipping for programmer. A little frustrating that the signal conditioner comes without the programmer, and you have to order it separately. It seems like if you are familiar with the product, you should be able to special order it without the programmer, not the other way around where you are psyched for the modules price point, order it, get it on hand, and find you have to pay another $45+ dollars (including shipping) to simply use it.
Date published: 2018-07-26
Rated 2 out of
5
by
Jess01 from
FINE PRODUCT BUT STUPID ADD ON'S
GOOD PRODUCT BUT YOU HAVE TO BUY THE PROGRAMMING UNIT WITH IT TOO
Date published: 2020-04-02
Rated 5 out of
5
by
Ken S from
Great price and easy to program.
I used this transmitter to replace 2 ABB single channel units on RTD's at a quarter of the price. Very easy to program once I played around with the controller a bit.
Date published: 2020-03-23
Rated 5 out of
5
by
Revive Energy from
Great Value
Extremely versatile TC transmitter. Works for virtually any type of thermocouple. Uses 120 VAC power. Easy to program for any range of operation. Provides stable, noise free mA signal to process and data acquisition and recording systems.
Date published: 2018-06-17
- RoHS 2015/863 - Voir le certificat
- Approuvé CE
Can this be programmed with a computer? You have no TXDIN70-Displays available to purchase.
Thank you for the inquiry. Unfortunately the TXDIN70 cannot be programmed with PC connection. Lead time for the module is 3 weeks.
Best regards,
OMEGA
Date published: 2022-12-29
After connecting K type thermocouple, the PV is correct on display, but SV is flickering, Please advise what setting is wrong. Thanks
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM.
Best regards,
OMEGA
Date published: 2023-06-19
What is the conversion speed?
Thank you for the inquiry. Sample time is 11 to 12 times / second.
Best regards
OMEGA
Date published: 2024-03-24
Can this device be calibrated if found out of tolerance? If so can you send me the instructions on how to calibrate it.
Hi Buckslayer
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2022-07-26
Good morning, is a 3D CAD model of the TXDIN70 available?
Hi MGibbons
Thank you for the inquiry. Unfortunately we do not offer 3D CAD or similar drawing for this product.
Best regards
OMEGA
Date published: 2022-02-03
Hello. I'm trying to connect an Omega RTDM12 compact RTD probe to this transmitter. Can you please tell me which pins from the probe connect to which input terminals on the transmitter? Thanks.
Hi RobE
Thank you for the inquiry. On the RTDM12 series the 2 conductors adjacent to the key will go to 14,15 ( order does not matter). Then 1 of the 2 remaining conductors will connect to 16. Same sequence applies to Input 2.
Best regards
OMEGA
Date published: 2023-12-24
Hy Omega, What are the response times: Start up; Update; Response and Warm up? If I program it to a range of something, will store it in the memory? Will restore it when bootloading? eg if the power is switched off and on. Best regards,
Thank you for your inquiry. The sampling rate is 11~12 times per second. This device aves parameter changes whether the unit is on or off.
Date published: 2020-12-17
Hello, Omega, I would like to ask whether TXDIN70 can be connected to the computer for data collection
Hi bao77,
Thank you for the inquiry. Unfortunately this device has no communication options for data collection.
Best regards
OMEGA
Date published: 2022-09-08
External plug-in display (display is required to program transmitter). Display comes with cable
C$60.46
86 In Stock