PST rejoint DwyerOmega. En savoir plus>
Uniaxial, Linear Strain Gauges with Transducer Quality
3.2 mm Grid Length, 3.2 mm Grid Width 350 Ω Resistance, ST STC Number
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$90.52 |
| 5-9 | C$85.99 |
| 10-24 | C$84.18 |
| 25-49 | C$80.56 |
| 50-99 | C$78.75 |
| 100+ | C$76.94 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Conveniently Priced per Pack of 5
- Rugged, High Reliability
- Flexible, Small Bending Radius
- Broad Temperature Range
SGT-3N/350-TY43 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Grid Length Range
Grid Length
Grid Width
Connection Type
Resistance
STC number
Grid Style
Temperature Range Units
Temperature Range Min
Temperature Range Max
Maximum Strain
Features
OMEGA™ transducer quality strain gages are available in a variety of patterns to cover most transducer design requirements. Their rugged construction, reliability and flexibility make them suitable for highly accurate static and dynamic transducers. The measuring grid is formed by specially formulated etching constantan foil, which is then completely sealed for long term reliability in a carrier medium composed of polyimide film.
Rated 5 out of
5
by
AACEng from
Remarkable results
We used both aluminum and steel thermally compensated gages, both with excellent results (both in quarter bridge axial loading and half bridge beam bending applications). We are using a 32bit isolated analyzer.
Date published: 2019-04-17
Rated 5 out of
5
by
Cathy from
Good
It is good to using, data is correct and do not have any different with other gage.
Date published: 2016-09-09
What is the gauge factor for these strain gauges?
Andrew, Thank you for contacting Omega Engineering. The Gage Factor will be 2.00 +/- 5% , the actual value will be printed on each package. If you have more questions, kindly email pressure@omega.com
Date published: 2021-08-30
Is this product have any data from the strain gauge after reliability test (ie. bending test). If so, could you kindly provide the data? thanks in advance.
Hello, my apologies we do not have any data from reliability testing.
Date published: 2023-10-20
solder pads are of which material?
Thanks for your question. The SGT series are made from Constantan, a copper/nickel alloy. This is the material at the solder pads, which need a little abrasion and the use of a liquid flux to get a good solder join. Please contact our Tech Support if you have any further questions.
Date published: 2019-05-13