Sondes avec câble

Omega's RTD probe with lead wire offers choice of 2-3- or 4-wire configuration. This is available in three temperature ranges covering -200°C to 600°C (-328 to 1112°F)

Family of 100 ohm, Class B accuracy RTD sensors including surface mount, bolt down, immersion, air sensing and screw down designs. Sold in 3-Packs.

Thermocouple sensors great for installing into pipes or limited space applications. 1/8" or 1/4" NPT mounting threads available with 72" of Stainless Steel overbraid cable.

Configurable thermocouple probes with lead wire. Molded transition joint from probe to cable is miniature (260°C max). Probe diameters range from .010" to .125".

Thin-film element RTD probes with 1/8" NPT brass compression fittings and armored cable. Commonly used in extruder & molding equipment. Straight and bend options available.

RTD Sensors great for installing into pipes or limited space applications. Single and Dual element designs, 1/8" or 1/4" NPT mounting threads available with 72" of lead wire.

Probe contains an integrated circuit (IC) transducer AD592CN that provides an output in microamps that is proportional to temperature. Requires 4 to 30 VDC input voltage.

General use, straight thermistor probes can be used as-is or adapted with mounting accessories. Multiple resistances and accuracies available. Probes have extension cables.

Wire-in-tube construction provides the simplicity of a wire thermocouple in a rigid probe package. Available in a variety of sizes and calibrations.

Thermocouple probes have a metal transition between the sensor & cable. Cable has a Stainless Steel Overbraid to protect it from damage and a miniature connector attached.

Spring-loaded quick-connect bayonet style thermocouple probes with armored cable. Commonly used in extruder & molding equipment. Both Straight and bend options available.

Class A, pt100 RTD immersion probes with 1/8" NPT mounting threads. 40 inch long PFA insulated lead wires and 3-prong connector come standard.

Configurable thermocouples with 0.010", 0.020", 0.032", or 0.040" diameter probes, metal transition joints and PFA insulated extension wires.

Ultra Precise RTD Sensors for Industrial Applications

Omega's "BX" armored probe is designed for resistance to abrasion and snagging and excessive movement. Comes with choice of PFA- or fiberglass-coated wires.

Thermocouple probes with 1/16" OD & a .020" diameter reduced tip for enhanced response to temperature change. Metal transition joint with PFA insulated cable & mini connector.

Probes with Stainless Steel Tips for use under the high pressures and temps found in plastic extruders. Available in single & dual element options with 1/2"-20 NF threads.

Family of linear thermistor sensors with lead wire including cable, surface, air, and immersion probe styles. All come with resistor sets to linearize the output.

PFA-Coated RTD Probes for Harsh Chemical Applications

Small diameter sensor allows for use in tight spaces, hermetically sealed and available in three resistances and standard lengths.